Residential · Memphis, TN
A lanai screen enclosure should feel solid, look clean, and stay tight through wind, rain, and heavy pollen. Memphis Screens installs and repairs enclosures using heavy-duty aluminum framing, proper anchoring, and screen mesh matched to how you use the space in Memphis, TN.
We start with the base and attachment points because that is where enclosures fail first. For installs, we verify slab pitch, check existing footers or patio edges for spalling and cracks, and confirm we have sound structure for anchors. Framing is laid out plumb and square, then fastened with corrosion-resistant hardware and concrete wedge anchors or tapcon-style concrete screws as conditions allow. If you are repairing an existing lanai screen enclosure, we stabilize loose posts, replace bent rails, re-square door openings, and reset spline channels before any new mesh goes in.
Memphis weather and yard conditions dictate the right build and finish details. We plan for wind load at corners and door returns, add kick plates where needed, and keep roof-to-wall transitions tight to reduce water intrusion and rattles. Mesh selection is tailored, fiberglass for standard use, stronger options like polyester for pets and high-traffic doors, and tighter weaves for better insect control. To keep the enclosure looking sharp, we align sightlines, match existing bronze or white finishes when possible, seal fastener penetrations, and install clean trim so you do not end up with gaps, waves, or uneven panels.
Customers choose Memphis Screens for straightforward quotes, durable materials, and tidy job sites. You get a free written estimate, clear scope (repair vs. partial rebuild vs. full replacement), and practical recommendations instead of upsells. Our crews work with purpose-built screening tools like spline rollers, miter saws for aluminum extrusion, and precision levels to keep frames square and doors latching properly. We are licensed and insured, communicate scheduling clearly, and treat your home or commercial patio like a finished space, not a construction zone.
After installation or repair, we do a full walkthrough and test every opening. Doors are checked for smooth swing or slide, proper latch alignment, and consistent reveal around the frame, and we confirm screen tension and spline seating panel by panel. We also point out simple maintenance steps, like rinsing pollen off mesh, keeping tracks clean, and watching for pet claw damage near corners. You leave with an enclosure that blocks insects and debris, improves ventilation, and is built with serviceable components so future re-screening is fast and affordable.
Yes. We provide a free written estimate after reviewing the scope, measuring openings, and confirming mesh and framing options.
In many cases, yes. We’ll review your current frame finish and recommend the closest standard color options or a practical approach for a consistent look.
Yes. We can patch or replace damaged mesh, rebuild bent panels, replace spline, and adjust or replace screen doors and hardware.
Timing depends on scope and materials, but most repairs and rescreening are quicker than full enclosures. After the on-site measure, we’ll provide a schedule with your written estimate.
Yes. We handle home screen rooms and porch enclosures as well as commercial screened entries and patio areas where durability and consistent appearance matter.
If your lanai screen enclosure is sagging, pulling loose at the slab, or letting mosquitoes through at corners and doors, the fix is usually a mix of structural correction and proper re-screening. Memphis Screens installs new enclosures and repairs existing frames, panels, and screen doors with materials chosen for long-term performance, not quick patches. We work on patios, pools, covered lanais, and commercial outdoor seating areas, building clean, square openings that hold screen tension and keep fasteners tight.
A quality lanai screen enclosure starts at the attachment points. We inspect posts, bottom tracks, and header connections for movement, corrosion, and stripped fasteners. For repairs, we can replace damaged aluminum members, rebuild door jambs, re-seat spline, and re-screen individual panels without tearing down the entire enclosure when the frame is still sound. For new builds, we lay out the footprint, confirm door placement and traffic flow, and assemble aluminum extrusion with tight miters and reinforced corners so the structure stays rigid over time.
Screening is not one-size-fits-all. Fiberglass mesh is common for general use, while stronger pet-resistant mesh helps near doors and low panels. Tighter weaves can reduce small insects, and we can discuss visibility, airflow, and durability tradeoffs so the enclosure fits how you live. We install mesh with consistent tension, proper spline size, and clean edges to prevent blowouts and early tearing.
Expect a professional finish and a clear handoff. Once the work is complete, we verify door operation, check for gaps at corners and transitions, and confirm panels are secure and uniform. You get a written scope, practical care guidance, and serviceable construction that makes future re-screening straightforward. If you are ready to upgrade or fix a lanai screen enclosure in Memphis, contact Memphis Screens for a free written estimate.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Memphis. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
