Residential · Memphis, TN
A bent, loose, or corroded screen frame can make a good screen fit poorly, rub, or pop out in wind. Memphis Screens repairs and replaces aluminum screen frames for windows, doors, and porches, restoring proper fit, smooth operation, and a clean look.
We start by checking the screen frame for twist, bowed rails, cracked corners, and enlarged spline channels, then confirm the opening is square and the track is sound. Hardware gets inspected too, corner keys, pull tabs, springs, plungers, tension clips, and screen door rollers, because frame problems often show up as sticking or rattling. When repair is possible, we re-square the assembly, replace damaged corners, and re-tension the screen using the correct spline diameter so the mesh stays tight without warping the frame.
Local heat, humidity, and storm cycles can accelerate oxidation on aluminum and cause fasteners to seize, so we use corrosion-safe methods and replace questionable parts instead of forcing them. For replacement work, we build a new frame to match the opening using aluminum screen frame stock, mitered or square-cut as required, with fresh corner connectors and new spline. You can choose standard fiberglass insect screen, tighter weave options, or pet-resistant mesh where durability matters most, and we set final tension so the frame sits flat and the edges finish clean.
Memphis customers choose us because we treat screen frame work like precision fitting, not a quick patch. You get clear options, repair versus rebuild, hardware-only fixes, or full screen and frame replacement, based on what actually failed. We show up with the right tools, spline rollers, miter saw for frame stock, measuring squares, and replacement corners and rollers, so most jobs can be completed without repeat visits.
Before we wrap up, we dry-fit the screen frame, verify even reveal, and confirm it seats properly in the channel with no bowing, gaps, or rattles. On doors, we test travel, latch alignment, and roller height so the panel rolls smoothly and closes square. You receive a free written estimate up front, the old damaged parts hauled off if requested, and a finished screen frame that fits tight, looks straight, and is ready for daily use.
Yes. We provide a free written estimate after reviewing the scope, measuring openings, and confirming mesh and framing options.
In many cases, yes. We’ll review your current frame finish and recommend the closest standard color options or a practical approach for a consistent look.
Yes. We can patch or replace damaged mesh, rebuild bent panels, replace spline, and adjust or replace screen doors and hardware.
Timing depends on scope and materials, but most repairs and rescreening are quicker than full enclosures. After the on-site measure, we’ll provide a schedule with your written estimate.
Yes. We handle home screen rooms and porch enclosures as well as commercial screened entries and patio areas where durability and consistent appearance matter.
If your screen frame is bent, loose in the track, or separating at the corners, replacing the mesh alone will not solve the problem. Memphis Screens provides screen frame repair and replacement for window screens, sliding screen doors, and porch and patio enclosures, with a focus on correct measurements, square assemblies, and hardware that operates smoothly. We work with common aluminum frame profiles and rebuild screens to match the opening so they seat properly and stay put in wind and everyday use.
Screen frame problems usually show up as the screen popping out, rubbing when you open a window, or leaving gaps where bugs get in. We inspect the frame rails, corners, and spline channel, then check the receiving track for damage or buildup that prevents a proper seat. Many frames can be repaired by replacing corner connectors, re-squaring the assembly, and installing new spline at the correct thickness so the mesh stays tight without bending the frame. When rails are kinked, oxidized through, or the channel is stretched, replacement is typically the long-term fix.
For new builds, we measure each opening, cut and assemble aluminum frame stock, and install the selected mesh with consistent tension. Common upgrades include pet-resistant screen for scratch resistance, and tighter weave choices when you want improved insect control while keeping airflow. On sliding screen doors, we can address frame alignment along with worn rollers or latch issues, so the panel rolls straight and closes cleanly.
Whether you need a single window screen frame rebuilt or multiple units replaced, you get straightforward recommendations and workmanship aimed at fit, durability, and appearance. Share the size, type of opening, and any photos of the damaged screen frame, and we will provide a free written estimate and schedule the repair or replacement.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Memphis. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
